搜索
搜索
/
/
Risk Analysis of Airtight Performance Test of High Activity Pharmaceutical Production Equipment
全部分类

Risk Analysis of Airtight Performance Test of High Activity Pharmaceutical Production Equipment

  • 分类:知识中心
  • 作者:Marya
  • 来源:original
  • 发布时间:2021-05-11 15:13
  • 访问量:

【概要描述】

Risk Analysis of Airtight Performance Test of High Activity Pharmaceutical Production Equipment

【概要描述】

  • 分类:知识中心
  • 作者:Marya
  • 来源:original
  • 发布时间:2021-05-11 15:13
  • 访问量:
详情

Nowadays there are more and more pharmaceutical corporations producing highly active medicine, it’s very normal to see that the utilization of airtight equipment in the production process of highly active productions. However many companies are still confused about the airtight performance test of this type of equipment and how to conduct the risk assessment of the test process. Therefore, this article will pay attention to the introduction of how to conduct airtight performance test and risk assessment of airtight equipment used in the production process of highly active medicine. Hoping relevant pharmaceutical corporations can be enlightened from it, and making the production and verification of highly active drugs more standardized and scientific.


 1. overview my

 In this article, "highly active drugs" refers to the general term for drugs with high activity, high toxicity, high allergenicity, and high risk. The article 28 of the 2010 Chinese GMP mentioned that worker of high risk operation area(eg: the production area of high activity, high toxicity, high infectivity, high allergenicity materials) should be accepted specialized train; the article 46 mentioned that the production of drugs with special properties, such as highly allergenic drugs (such as penicillins) or biological products (such as BCG or other drugs prepared with active microorganisms), must use dedicated and independent plants, production facilities and equipment. This is a special requirement for this class of drugs.

According to the requirements in China GMP, the scope and extent of confirmation or verification should be determined by risk assessment. The airtight performance test of the airtight equipment used in the production of highly active drugs also requires a risk assessment.


 2. The elements may influence the equipment’s airtight performance my

2.1 Staff

Whether the staffs had been trained and have relevant experience.And carefulness of the personnel during operation, the range of movements, etc. all may affect the results of the airtight performance test of the equipment.  
    2.2 Equipment    

It’s very important for the choose of test instrument. For air sampling, the flow rate of sampling pump is usually set at 2 L/M, and the sampling pump is calibrated with a calibrated flow meter. In addition, sampling pump need to be calibrated before and after test to ensure sampling pump does not change a lot in the test process. The air flow rate is very important, and the relevant information of the pre-calibration and post-calibration should be recorded.

For surface sampling, sampling swabs should not fall off impurities, should not react chemically with the substance to be tested, should be easy to elute, store and use. 
    2.3 Materials

In suitable circumstance, the particle airtight performance test of the equipment can use substitute materials instead of actual materials. Test data completed with substitute materials can be used to predict similar operating conditions for actual materials. In some circumstances, using substitute materials may be necessary. For example, actual materials’ chemical analysis method is not insensitive, or medicine ingredients are very expensive or medicine components are dangerous. Actual operation may have many kinds of substitute materials can be selected. However its chemical, physical properties and powder characteristics should be considered comprehensively, and should be close to the properties of the actual material. 
    2.4 Method

Sampling methods generally are air sampling and surface sampling.

Air sampling of personnel usually places the sampling head in the breathing area of the personnel(mouth, nose), this can simulate the total amount of inhalable particles. When sampling in operator breathing area, sampling equipment can’t disturb the normal operation of operator. Breathing area sampling is recognized as the sampling method which closest to the actual impact on the operator, because this method considers some relevant elements about operator’s activities and actions.

Surface sampling(swab sampling or wipe sampling) also can be used to ensure the equipment airtight property whether meet the requirement. Surface sampling can’t adopt the methods of air sampling, such as surface’s particulate matter, operators’ clothes, or operators’ hand/glove.

Comparing with air sampling, the execution of surface sampling should use validated methods and need to consider recovery rate of substitute from specific surface to solvent. The sampling area is specific 100c㎡(10cm×10cm), but for the special requirements of geometric or contaminated equipment, in this case, take a specific area.
    2.5 Environment

Airtight equipment particle airtight performance test need to consider the test environment influence for the test result.

During the test, we need to record and think basic factors of test environment, including air quality, temperature, humidity, air changes and other factors.
    2.6 Measuring

Entering the measurement phases after sampling with sampling instrument, the measurement process needs to consider the errors that may be caused by the analysis process, the test instrument for sample analysis needs to ensure its stable and reliable performance. Needing a impeccable instrument operating procedures to guide personnel related work.
    2.7 Risk analysis of airtight equipment should also consider the following factors

Considering any influence for the accuracy of test result of any activities now and before. For example, the presence of contamination residues may affect the results of sample analysis;

If you want to compare the airtight performance of different sealing equipment, you should concern the change of any system related to sealing equipment, near system or support system. Because these changes may influence the airtight ability of sealing equipment, such as change of air flow in air conditioning system, change of standard operating procedure (SOP), change of equipment itself, and change of sampling equipment;

If an activity has a potentially significant risk to the accuracy of the test results, remedial measures should be taken to reduce or eliminate the impact;

Text details should be detailed record;

If video or photography has no influence to the product or environment, it is a valid method to provide sit recording.


 3.Conclusion my

The airtight environment required for highly active drugs in the pharmaceutical production process is guaranteed by sealed equipment, equipment also forms the first protective screen for staff. If the airtight performance of the equipment does not meet the requirement, not only the drug’s quality will be damaged, but also the operator’s health will be influence a lot. Therefor, how to ensure the airtight ability of sealing equipment is a great important question for pharmaceutical companies which produce highly active medicine. This article provides guidance or suggestions for the risk research of equipment airtight capabilities of related enterprises from the perspective of how to identify risks and possible risk points of sealing equipment, in order to bring certain help.

 

my

my

关键词:

联系我们

上海办事处: 中国上海市浦东新区富特北路211号

长沙办事处: 湖南省长沙市雨花区复地星光天地6栋23069

工厂1:湖南玛雅智能科技有限公司

             地址:中国湖南省长沙市自贸区三一路三号工业园区七厂

工厂2: 中国江苏省苏州市相城区渭塘镇玉盘路555号

工厂3: 苏州工业园区扬和路创业投资工业广场15-A

电话: +86-19198185202

邮箱:info@marya.com.cn

搜索

Search
搜索

Copyright © 2020 上海玛衙制药设备有限公司    沪ICP备11038675号-4

Powered by www.300.cn changsha